No laser through nozzle

I just received my Beamo laser today. I went through all the setup steps and added my auto focus module. I am not getting any laser output from the nozzle. I did all the mirror calibrations and they are firing perfectly, all the way to the top of the nozzle. But doing the tape test at the bottom of the nozzle, nothing comes out. Any help is appreciated!

I suggest unscrewing the nozzle and seeing where the beam goes (with tape). My guess is that it’s hitting the inside of the nozzle so you may have to turn the last mirror quite some distance to bring that last leg of the optical path into place.

When you get close, it’ll reflect off the inside edge of the nozzle’s exit aperture, making a messy burn or a double burn.